DURO-COLOR is a water-dilutable, silk-matt full-tone acrylic paint for interior and exterior use. High-quality acrylic binders, pigments and fillers make DURO-COLOR the absolute professional quality with years of experience. The coatings are characterised by low sensitivity to dirt, high abrasion resistance and alkali resistance. The coatings remain breathable, are hard-wearing and show excellent light and weather resistance. DURO-COLOR is easy to process and economical to use thanks to its high coverage and opacity.

BLENDA^®-COLOR is a quick-drying, water-dilutable and strongly pigmented acrylic luminous paint. By the right structure with a white primer and a resistant UV topcoat, durable coatings for exterior and interior use are achieved. The intensive brilliant colours are used for markings, safety instructions and fashionable objects.

BLENDA^®-LIGHT is a fast-drying, highly pigmented afterglow paint for indoor safety signalling. BLENDA^®-LIGHT absorbs and dispenses radiant energy (sunlight, electric light) and then releases it over a longer period of time in the form of light. Daylight and artificial light are effective for radiant energy. LEDs are weakly effective and red and yellow light are ineffective.

CREACOLOR is a water-dilutable, low-odour and slightly thixotropic glaze decoration paint for exterior and interior use. Due to the translucent pigmentation and the long open time, a variety of decorative effects can be achieved with CREACOLOR – through simple and playful use of colors and transparency. CREACOLOR is extremely extensive in use, is pleasant to the touch and can be applied without leaving any marks. The coatings remain breathable, lightfast and have good resistance to washing and abrasion. Depending on the choice of colour, however, the use as a facade glaze paint is only suitable to a limited extent.

BLENDA^®-MET is a water-dilutable and decorative universal bronze paint based on modified and low-odour polyurethane acrylic resins. Thanks to the use of pure metal bronzes, the BLENDA^®-MET coatings are highly resistant to light and weather (non-oxidizing). The special combination of binders enables a haze-free work and the use of real metal pigments results in abrasion-resistant and colour-stable surfaces in exterior and interior areas.

BINA-COLOR is a special, water-dilutable acrylic paint, which was adapted to the color vision of bees. Science teaches us that the colour sense of bees differs greatly from that of humans. The colour spectrum is shortened for the bees. They also perceive ultraviolet light, which remains invisible to the human eye, as color. As a result, the bees are sometimes unable to distinguish between the usual colours. BINA-COLOR makes it easier for bees to find their way around the apiary, bees get lost less often and the loss of queens is greatly reduced by using these colors.

CREAPAD is a water-dilutable and low-odour wall panel paint based on acrylic polyurethane resin. The result is a matt, hard-wearing surface that is easy to clean from blackboard chalk. CREAPAD shows excellent processing properties such as flow, stability and filling power. The surfaces are extremely shock and impact resistant combined with a good resistance to abrasion.

CREAMIND 2K whiteboard paint is a high-gloss, water-dilutable and highly durable 2-component paint based on polyacrylate using chemical cross-linking with a special aliphatic isocyanate hardener. CREAMIND is economical and ecological and the coatings are extremely hard wearing, block resistant and non-yellowing. With CREAMIND you can turn virtually any smooth surface into a writable surface for whiteboard markers. CREAMIND has excellent adhesion properties on a wide variety of substrates and the coatings have excellent hand perspiration resistance as well as scratch and abrasion resistance.

Dry wipe whiteboard marker with round tip of ± 1mm. When dry, wipe lightly and cleanly with a felt cloth. Use SketchCleaner Cleaning Spray regularly to keep the surface clean and bright.

For removing stubborn stains and regular maintenance to keep your whiteboard surface clean and shiny. Spray onto the dry wipeable surface, leave to act for 5 minutes and then wash off clean with a microfibre cloth.

Mighty Brighty is a new and unique concept for creating a perfect projection on a wall or any smooth surface. All you have to do is paint the wall, then you can sit down and enjoy.

CREANOT magnetic paint is an iron containing, ready-to-use and water-dilutable topcoat based on acrylate resin. The attraction for magnets is that CREANOT magnetic paint contains fine non-rusting metal fillers which have been treated in a special manufacturing and finishing process for this application. This allows decorative magnetic surfaces to be achieved. A wall treated with CREANOT looks like an ordinary wall, but offers an invisible advantage: magnets stick to it. With CREANOT magnetic paint the wall is transformed into a play or work surface.

CREANOT magnetic plaster is an iron containing, ready-to-use and water-dilutable topcoat based on acrylate resin. The attraction for magnets is that CREANOT magnetic plaster contains fine non-rusting metal fillers which have been treated in a special manufacturing and finishing process for this application. This allows decorative magnetic surfaces to be achieved. A wall treated with CREANOT looks like an ordinary wall, but offers an invisible advantage: magnets stick to it. With CREANOT magnetic plaster the wall is transformed into a play or work surface.

CREANOT are extremely strongly adhesive neodymium magnets, consisting of neodymium, iron and boron (NdFeB). They are currently the strongest permanent magnets on the market. CREANOT stainless steel magnets have high holding forces at low volume, are not subject to any loss of magnetic force when used correctly, are weather-resistant, non-colouring and visually very attractive.

CREASIN is a low-viscosity, solvent-free and self-leveling 2-component high-solid epoxy clearcoat system, with which pore-free, liquid-tight and decorative coatings and pouring can be achieved. CREASIN is slow curing, easy to apply and can be used as a transparent and water light topcoat or in thicker layers also as casting resin. These can then also be sawn, drilled and ground.
Objects and coatings produced with CREASIN are characterized by high mechanical resistance and good wear resistance. Good resistance to chemicals, especially aqueous salt solutions, diluted inorganic acids and alkalis as well as solvents is also achieved.

Highly concentrated and translucent dye for colouring transparent resins. Dosage depending on the desired colour intensity (0,1 – 1 %) and the different colour shades can be mixed very well with each other.

SILANOVA is an extremely quick-drying stentering varnish for painting covered surfaces made of paper, fabric or nylon – especially for model aircraft construction.

Rust imitation made easy with CREANOX. Simply apply with a brush and your objects will get a decorative, «rusty» look. CREANOX is water-dilutable, low-odour and pleasant to work with. It gives the most diverse media a durable and abrasion-resistant effect coating.

CREAFLOC are single-coloured acrylic flakes for the decorative design of floor and wall paints and coatings. They conceal the smaller unevennesses that are often disturbing in plain-coloured coatings and the insensitivity to dirt is increased. The flakes, single-coloured or in colour combinations, are usually strewn evenly by hand into the wet final coating with a coverage of 20–40 %. With a final sealing lacquer the flakes then receive the strength and the surface the appropriate resistance.

CREATON is a fine-grained, mineral two-component cement-based effect filler with a low installation height of 2–3mm. With CREATON effect filler «Béton Ciré», seamless, modern and unique surfaces can be achieved on a wide variety of substrates. Depending on the desired effect, the filler is applied and smoothed using stucco trowels made of inox or plastic.

CREAXIT is a water-dilutable, low-odour impregnating primer with very good hardening effect. It is suitable for absorbent and non-absorbent substrates for subsequent coatings with CREATON effect filler «Béton Ciré».

Technique for creating decorative structures for interiors. In combination with VALPAINT Lamé (colours Col. 250-259), VALPAINT Meteore 8 creates impressive, three-dimensional effects with metallic reflections.VALPA INT Meteore 8 can be used on walls in the interior. Suitable substrates are flat, low-absorbing surfaces that have been VALPAINT Primer 400. Effects: Spatula effect, vein effect, flower effect, smooth effect.

Valpaint Meteore 10 Cemento is a base filler that is used together with the coating material Valpaint C 100 Over for the production of various concrete and stone looks. Suitable substrates are even, absorbent surfaces that have been pre-coated with Valpaint Primer 1200.

Valpaint Meteore 10 Marmorizzato is a basic filler which is together with the coating material Valpaint Sabulador Soft, for the production of various marble looks. Both materials in the Valpaint Marmorizzato effect. Suitable substrates are flat, slightly absorbent surfaces that have been pre-coated withpre-coated with Valpaint Primer 1200.

Lime-based decorative filler for jointless surfaces in marble look. Especially suitable for walls and floors in wet and damp rooms. Used in the system with primer coat RASANTE DDS+B60, joint filler STUCCO SL20, intermediate coat SABULADOR SOFT and final coat TOP COAT AR60/AR70+CT50 or gloss Gel EP40.

High-quality, decorative design technique on a water-based acrylic base for interior use. VALPAINT SABULADOR Soft can be used to createvery finely structured, decorative sand reflex design techniques can be produced. Coatings with VALPAINT SABULADOR Soft are diffusible. VALPAINT SABULADOR Soft is suitable for exclusive, modern and stylish wall and ceiling designs with a particularly fine sand glaze effect. VALPAINT SABULADOR can be glazed, in aluminium, gold and silver. Suitable substrates are even, slightly absorbent surfaces that can be surfaces, which are pre-coated with VALPAINT PRIMER 400.

High-quality, decorative design technique on a watery acrylate basis for indoors. VALPAINT SABULADOR LUX produces exclusive, modern and stylish wall and ceiling designs with a rough sand glaze effect. VALPAINT SABULADOR LUX can be applied glazed, uni-coloured and in gold and silver. Suitable substrates are even, slightly absorbent surfaces that have been pre-coated with VALPAINT PRIMER 400.

High-quality, decorative real rust design technique for indoors. With Valpaint Klondike Ferro, decorative rust effects can be created in conjunction with an oxidation technique, decorative rust effects can be created. Suitable substrates are even, slightly absorbent surfaces that have been pre-coated with Valpaint Primer 1200. Please note: The colour shades may differ from the catalogue by 20-30% from the catalogue. Further effects: Copper oxidation and aluminium.

High-quality, decorative design technique on a watery acrylate basis for interior use. With VALPAINT Mavericks decorative luminescent reflex design techniques can be produced. VALPAINT Mavericks is suitable for exclusive and modern wall and ceiling designs with a three-dimensional play of colours, reminiscent of the wave motion of the sea. Suitable substrates are even, slightly absorbent surfaces that are pre-coated with VALPAINT Nautilus.

Highly diffusible, decorative lime smoothing filler for interior use. Suitable substrates are even, slightly absorbent surfaces such as smooth plaster, plasterboard, concrete etc. that have been primed with VALPAINT Primer 1200.

Pigment additive paste for interior use with gold or silver effects. Suitable for all traditional water-based colours. VALPAINT Additivo Star must be stirred well before further processing. Consumption 100ml for 1 litre of paint, 250ml for 2.5 litres of paint.

Easy to apply, water-based Universal primer for subsequent VALPAINT effect coatings. Suitable for substrates such as cement, concrete, gypsum, plasterboard, wood and metal as well adhering old coatings.

Valpaint Top Coat is a 2-component, transparent, matt top coat. As an additional protective coating for decorative Valpaint surfaces. For interior wall surfaces, also for the private bathroom area bathrooms, especially in wet areas such as showers, behind washbasins etc. Can also be used as surface protection in the Valpaint E-Volution system. The KIT consists of the base coat Top Coat AR 70 MATT or AR 60 GLANZ and the hardener + CT 80. Resistance is valid against splash and drain water in private bathrooms, standing water or continuous wet exposure must be excluded.

Decorative glass fibre fabric in various surface structures for painting over. %ProductBrand% Wall covering with textile character looks cosy and decorative, is hard-wearing, flame resistant and easy to clean according to the top coat. Free colour design, aesthetically appealing and resistant. Suitable for all interiors with a wallpaper-compatible substrate.

CREATEX is a water-dilutable, low-odour, ready-to-use dispersion adhesive for interior wall coverings on walls and ceilings. CREATEX is easy and pleasant to apply, is economical in use and has a sufficiently long open time and is equipped with fungus-inhibiting additives.

CREATEX is a water-thinnable and fast-drying colourless wallpaper primer for absorbent as well as problematic substrates. It strengthens the adhesion of the wallpaper and helps to prevent wallpaper peeling. CREATEX shows a very high penetration depth, consolidates the substrate to be wallpapered and regulates the absorbency. Does not attack solvent-sensitive polystyrene thermal insulation boards.

BLANCOL is a water-dilutable and colourless wallpaper primer for problematic surfaces. It consolidates the substrate to be wallpapered, prevents crumbling and regulates the suction power. Strengthens the adhesion of the wallpaper and helps to prevent wallpaper peeling. Does not attack solvent-sensitive polystyrene insulations.

ERFURT woodchip wallpapers are wall coverings consisting of several layers of paper in which structure-forming wood fibres are firmly incorporated. All ERFURT woodchip woodchip grades are manufactured using the same production process and differ only in the structure-forming wood fibres. Only high-quality raw materials are used for production and specifically selected recycled papers and cellulose are used.

ERFURT Variovlies is a smooth wall covering made of special cellulose and textile fibres combined with polymeric binders. Variovlies is dimensionally stable as well as crack-bridging, water vapour permeable and covers colour contrasts of the substrate well. In most cases, one coat of paint is sufficient and, in combination with the appropriate coating material, is very durable.

Special paste with methyl cellulose. For heavy wallpaper and woodchip wallpaper that can also be dry stripped.

For wallpapering paper and woodchip wallpaper. Also suitable for making masks, figures and objects from paper pulp and for fixing wallpaper.

Paste syringe made of plastic with 1 needle. For removing air bubbles under glued wallpaper.

The KOBAU microlith filler fleece is used to reinforce paint systems in case of plaster surface cracks. The technique "reinforcing instead of multiple filling" allows smoothing rough substrates such as glass fabric wallpaper or coloured stone plaster in one work step. KOBAU microlith Spachtelvlies is normally flammable and complies with building material class E according to DIN EN 13501-1. The fleece can be used indoors and outdoors.

KOBAU Armiera paint fleece is used to reinforce paint systems in case of plaster surface cracks. Due to the regular glass fibre structure, equally high-quality surfaces are achieved in the area of drywall and interior finishing. KOBAU Armiera Anstrichvlies is water- and weatherproof as well as rot-resistant.

The ERFURTKlimaTec is a climate panel made of expanded glass granulate. The front is covered with a glass fleece and the back is laminated with a mesh fabric. The KlimaTec panel is used for mould prevention and mould remediation. The diffusion-open panel increases the wall surface temperature and has a moisture-regulating effect. The climate panel creates flat and pressure-resistant surfaces on uneven surfaces and offers various possibilities for (diffusion-open) reworking, e.g. by wall coverings, plasters and coating materials.

Self-adhesive end coupling tape for KlimaTec climate panel.

The ERFURT system adhesive SR 6 is used for laying the interior insulation boards ERFURT-KlimaTec IP 2500+ / IP 3500+, climate boards ERFURT-KlimaTec KP 2500+, ERFURT-KlimaTec reveal boards LP1000+ and ERFURT-KlimaTec insulation wedges DK 2. The adhesive consists of lightweight fillers, cement and additives.

The Superwand panel with an integrated vapor barrier is a high-quality insulating panel from Korff AG, which is used for internal thermal insulation. In addition to isolating living spaces, the Superwand DS is primarily used to eliminate mould problems. The Superwand PRO is mainly used for thermal insulation, as it is equipped with an additional insulation layer. Internal insulation with the Superwand is an excellent solution, especially for renovation work where the external facade is to be preserved and / or external insulation is not possible or unsuitable. The Superwand can be used in all rooms of the apartment - even in the bathroom.

For professional installation of the Superwand panels, you need a wall covering adhesive. For absorbent substrates, we recommend the Superwand adhesive or the Superwand Express adhesive, for non-absorbent substrates the Superwand Contact adhesive. The wall covering adhesives are characterised by high initial adhesion and bonding strength. The express adhesive dries within 24 hours, the contact adhesive within 12 hours. The wall covering adhesives are waterproof, solvent-free and suitable for both indoors and outdoors. Please refer to the technical data sheet.

Toothed trowel made of stainless steel 10x10mm with screwed wooden handle. Ideal for working with ERFURT KlimaTec panels.