8.1	Decorative effect and functional products / Functional colours

844 CREASIN 2K-Clear casting resin

CREASIN is a low-viscosity, solvent-free and self-leveling 2-component high-solid epoxy clearcoat system, with which pore-free, liquid-tight and decorative coatings and pouring can be achieved. CREASIN is slow curing, easy to apply and can be used as a transparent and water light topcoat or in thicker layers also as casting resin. These can then also be sawn, drilled and ground.
Objects and coatings produced with CREASIN are characterized by high mechanical resistance and good wear resistance. Good resistance to chemicals, especially aqueous salt solutions, diluted inorganic acids and alkalis as well as solvents is also achieved.

844 Technical Data Sheet EN 844 Safety Data Sheet EN 905 Safety Data Sheet EN

Other languages

844 Technisches Merkblatt DE 844 Fiche technique FR 844 Scheda tecnica IT 844 Ficha técnica ES 844 Ficha técnica PT 844 Sicherheitsdatenblatt CHD 905 Sicherheitsdatenblatt CHD 844 Fiche de données de sécurité CHF 905 Fiche de données de sécurité CHF 844 Scheda di dati di sicurezza CHI 905 Scheda di dati di sicurezza CHI 844 Fiche de données de sécurité FR 905 Fiche de données de sécurité FR 844 Veiligheidsinformatieblad NL 905 Veiligheidsinformatieblad NL 844 Ficha de datos de seguridad ES 905 Ficha de datos de seguridad ES 844 Ficha de dados de segurança PT 905 Ficha de dados de segurança PT

Further information

CREASIN–Colour chart Example_Cutting Board_1 Example_Cutting Board_2 Example_Cutting Board_3 Example_Table_1 Example_Table_2

Article-No	Designation	Content	Density	SU	Packaging unit
844.5	transparent, water light	3,75 kg	1.12	(1)	bucket
844.1	transparent, water light	750g	1.12	(1)	can
905.1,25	Component B, hardener, 3:1	1,25 kg	0.94	(1)	canister
905.0,25	Component B, hardener, 3:1	250g	0.94	(1)	canister

Danger and safety instructions: 905 Component B, hardener, 3:1

Danger

H314:	Causes severe skin burns and eye damage.
H412:	Harmful to aquatic life with long lasting effects.
P101:	If medical advice is needed, have product container or label at hand.
P102:	Keep out of reach of children.
P103:	Read label before use.
P260:	Do not breathe dust / fume / gas / mist / vapours / spray.
P264:	Wash hands thoroughly after handling.
P273:	Avoid release to the environment.
P280:	Wear protective gloves / protective clothing / eye protection / face protection.
P301:	IF SWALLOWED:
P303:	IF ON SKIN (or hair):
P304:	IF INHALED:
P305:	IF IN EYES:
P310:	Immediately call a POISON CENTER or doctor / physician.
P363:	Wash contaminated clothing before reuse.
P405:	Store locked up.
P501:	Dispose of contents / container in industrial incinerator

Danger and safety instructions: 844 CREASIN 2K-Clear casting resin

Warning

H315:	Causes skin irritation.
H317:	May cause an allergic skin reaction.
H319:	Causes serious eye irritation.
H411:	Toxic to aquatic life with long lasting effects.
EUH205:	Contains epoxy constituents. May produce an allergic reaction.
P101:	If medical advice is needed, have product container or label at hand.
P102:	Keep out of reach of children.
P103:	Read label before use.
P261:	Avoid breathing dust / fume / gas / mist / vapours / spray.
P264:	Wash hands thoroughly after handling.
P272:	Contaminated work clothing should not be allowed out of the workplace.
P273:	Avoid release to the environment.
P280:	Wear protective gloves / protective clothing / eye protection / face protection.
P302:	IF ON SKIN:
P305:	IF IN EYES:
P333:	If skin irritation or rash occurs:
P337:	If eye irritation persists:
P391:	Collect spillage.
P501:	Dispose of contents / container in industrial incinerator