DUROPOOL is a fresh and seawater resistant underwater paint based on chlorinated rubber. DUROPOOL is suitable for the treatment of mineral substrates which are permanently exposed to water. DUROPOOL is resistant to chlorine-based water purification chemicals as well as briefly to diluted acids or alkalis used for cleaning baths.

BLENDA^®-POOL is a fresh- and seawater resistant underwater paint based on acrylic resin. BLENDA^®-POOL is suitable for the treatment of mineral substrates which are permanently exposed to water. BLENDA^®-POOL is resistant to chlorine-based water purification chemicals as well as briefly to diluted acids or alkalis used for cleaning baths. However, the mechanical resistance as well as the water resistance of BLENDA^®-POOL are significantly lower than those of DUROPOOL swimming pool paint.

BRILAPOOL is an air-drying, cold-curing 2-component paint based on acrylic polyurethane (DD). BRILAPOOL meets the highest demands for chemical and mechanical resistance. BRILAPOOL produces hard, abrasion-resistant yet elastic coatings with excellent resistance to chlorinated water and disinfectants and cleaning agents. BRILAPOOL coatings are underwater resistant, extremely weatherproof and UV-stable. If water disinfection takes place using active oxygen, electrolysis or an ozonization system, BRILAPOOL must not be applied.

BRICAPOX is a 2-component epoxy primer for highest demands on adhesion, corrosion and chemical resistance. BRICAPOX has excellent adhesion to iron, steel, light metals, galvanized surfaces, certain plastics, polyester, etc. BRICAPOX is quick-drying, filling and very resistant to mechanical stress. The coatings are resistant to water, oils, solvents, petrol, etc. and are ideal for underwater use. The excellent rust protection effect is based on modified zinc phosphates and is intensified by the addition of special rust inhibitors.

EPOSAN is a solvent-free and pore-closing 2-component epoxy resin primer. EPOSAN displaces water from the capillary structure in the surface zone of the concrete and acts as a barrier against rising damp.

DUROMAR is a strongly thixotropic, copper-containing and waterproof boat underwater paint based on modified alkyd resins. The fungicidal finish prevents the growth and build-up of algae and increases the gliding ability of boats. The coatings are resistant, highly weatherproof and show good durability of the copper colour.

AQUAPERL T® ist ein lösemittelfreies 2-Komponenten Epoxid/Amin-System, frei von CMR-Stoffen. Designed für den dauerhaften Innenschutz von Stahl- sowie Betonkonstruktionen bei Wasserkontakt entweder im Mehrschichtaufbau mit Glasmattenverstärkung um eine mögliche Rissbildung bei Betonkonstruktionen bis zu einem gewissen Grad zu verhindern, oder als Einschichtlackierung auf Beton und Stahluntergründen zur Gewährleistung der Trinkbarkeit von Wasser bei Speicherung oder Durchleitung.