17.4	Tinting systems, basic products / BRILA-TINT AC tinting system

529 SILAFIL 2K-PUR spray filler DD-529

SILAFIL is a 2-component acrylic-polyurethane spray primer with excellent filling capacity, low shrinkage, good sprayability and flow. This results in fast drying and quickly sandable coatings with an excellent surface hardness. With SILAFIL, up to 250 µm can be applied vertically per spray cycle. Due to higher layer thicknesses, bubbles or cracks can form. SILAFIL is resistant to water, oils, solvents, petrol, etc. and can be painted over with all 2-component systems (epoxy or polyurethane) as well as synthetic resin, acrylic and nitro paints or water-based paints.

Article-No	Designation	Content	SU	Packaging unit
529.TT.5	TT transparent 4,5 kg	5 kg	(1)	bucket
529.TT.1	TT transparent 0,9 kg	1 kg	(1)	can
960.0,5	Component B, hardener, 10:1	500g	(1)	canister
960.0,1	Component B, hardener, 10:1	100g	(1)	canister

Danger and safety instructions: 529 SILAFIL 2K-PUR spray filler DD-529

Danger

H225:	Highly flammable liquid and vapour.
H336:	May cause drowsiness or dizziness.
EUH208:	May produce an allergic reaction.
P101:	If medical advice is needed, have product container or label at hand.
P102:	Keep out of reach of children.
P103:	Read label before use.
P210:	Keep away from heat / sparks / open flames / hot surfaces. – No smoking.
P240:	Ground / bond container and receiving equipment.
P241:	Use explosion-proof electrical equipment.
P242:	Use only non-sparking tools.
P243:	Take precautionary measures against static discharge.
P261:	Avoid breathing dust / fume / gas / mist / vapours / spray.
P271:	Use only outdoors or in a well-ventilated area.
P280:	Wear protective gloves / protective clothing / eye protection / face protection.
P303:	IF ON SKIN (or hair):
P304:	IF INHALED:
P312:	Call a POISON CENTER or doctor / physician if you feel unwell.
P370:	In case of fire: Use alcohol-resistant foam
P403:	Store in a well-ventilated place.
P405:	Store locked up.
P501:	Dispose of contents / container in industrial incinerator

Danger and safety instructions: 960 Component B, hardener, 10:1

Danger

H225:	Highly flammable liquid and vapour.
H304:	May be fatal if swallowed and enters airways.
H315:	Causes skin irritation.
H317:	May cause an allergic skin reaction.
H319:	Causes serious eye irritation.
H332:	Harmful if inhaled.
H335:	May cause respiratory irritation.
H336:	May cause drowsiness or dizziness.
H373:	May cause damage to organs.
EUH204:	Contains isocyanates. May produce an allergic reaction.
P101:	If medical advice is needed, have product container or label at hand.
P102:	Keep out of reach of children.
P103:	Read label before use.
P210:	Keep away from heat / sparks / open flames / hot surfaces. – No smoking.
P240:	Ground / bond container and receiving equipment.
P241:	Use explosion-proof electrical equipment.
P242:	Use only non-sparking tools.
P243:	Take precautionary measures against static discharge.
P260:	Do not breathe dust / fume / gas / mist / vapours / spray.
P261:	Avoid breathing dust / fume / gas / mist / vapours / spray.
P264:	Wash hands thoroughly after handling.
P271:	Use only outdoors or in a well-ventilated area.
P272:	Contaminated work clothing should not be allowed out of the workplace.
P280:	Wear protective gloves / protective clothing / eye protection / face protection.
P301:	IF SWALLOWED:
P302:	IF ON SKIN:
P303:	IF ON SKIN (or hair):
P304:	IF INHALED:
P305:	IF IN EYES:
P312:	Call a POISON CENTER or doctor / physician if you feel unwell.
P331:	Do NOT induce vomiting.
P333:	If skin irritation or rash occurs:
P337:	If eye irritation persists:
P370:	In case of fire: Use alcohol-resistant foam
P403:	Store in a well-ventilated place.
P405:	Store locked up.
P501:	Dispose of contents / container in industrial incinerator